Hardware Contents; Preparation - BBQ CBT916L User Manual

HARDWARE CONTENTS

Part Description
M4 x 12 mm
AA
Screw
M5 x 12 mm
BB
Screw
CC
M4 Wing Nut
DD
M5 Wing Nut
6.4 mm Heat
EE
Resistant Washer
5.3 mm Lock
FF
Washer
GG
5 x 30 mm Pin
1.4 x 30 mm
HH
Cotter Pin

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble the product. Contact customer service for replacement parts.
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble your product on a hard level
surface that does not have cracks or openings.
• Clear an area large enough to layout all components and hardware.
• When applicable, tighten all hardware connections by hand first. Once the step is completed go
back and fully tighten all hardware.
• Follow all steps in order to properly assemble your product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (Included):
No. 2 Phillips Head Screwdriver
Picture
Qty (Shown to size)
2
11
2
13
2
6
2
2
6