Let's Use Security7000 - Atlantis A14-PC7000-HD1 Quick Start Manual

pressed the reset button for 3 seconds, until +CamHD reproduces the message
"Start Voice Configuration". Type the password of the WiFi network, where
your smartphone is connected to, and tap, after moving the speaker of the
smartphone close to the microphone of +CamHD, on Next. The smartphone will
reproduce an acoustic signal (it is sending the wireless configuration to the
microphone) and after a few seconds +CamHD will reproduce the message
"Received Network Configuration" to indicate that the wireless configuration
is successfully received. If you meet any mistakes repeat again this step trying to
limit the background noise. +Cam will try to connect to the WiFi network and will
reproduce the message "Successful Configuration" to indicate successful
connection.

Let's use Security7000

Toucing on My+CamHD button [
all +CamHD previously associated to your account. Tap on the device in order to
see the live streaming. Once in view mode, touching the following icons, you can:
[ ] save images on the smartphone .

[ ] talk with +CamHD (only with the devices with speaker).

[ ] save video on the smartphone.

[ ] change video quality (HD, SD, Fluent).

[ ] enter to the motion control page

[ ] view/download the videos recorded on the SD card inserted in

+CamHD.
[ ] enter in the advanced configuration page.

If you tap on the video will appear the icon to activate/deactivate the

microphone [
video to full screen [
full screen mode. There are icon for the recording [
[ ].
], at down left of the main page, you can see
/ ], rotate the screen of 180°[
]. Turning the smartphone the video will be shown in
ENG
] or enlarge the
] or to take picture