Atlantis A14-PC7000-HD1 Quick Start Manual page 18

+CamHD7000 & +CamHDOutdoor7000 via Wireless
Connect the power supply to the mains and then after a few seconds to + CamHD.
The device will start and play, after a few tens of seconds, the message Waiting for
Configuration while the WLAN LED is blinking.
 Tap the Smartphone Settings icon, then on Wifi icon. The smartphone will show
the network you are currently connected. Connect directly at + CamHD touching
it and typing the password (12345678). The network name is like IPC-H-XXX
(depending on the model). After a few seconds, your iPhone / iPad / Android will
be connected to the Wi-Fi of +CamHD.
 Start now Security 7000 (the account must be already configured). Will be show
what +CamHD is seeing (touching on Audio / PTZ / Audio call you can try the
functionality). Tap Next. Touch on the wireless network that you want +CamHD
will be connected and enter the password. Tap Done. After a few moments
+CamHD will reproduce the message Succesfull Configuration and Wireless LED
will stop flashing. Please Login again and confirm the device found by clicking
Add(enter the name and then tap Save) or tap on the [
LAN device(the SmartPhone must be connected by wireless to the same network
which +CamHD is connected by cable), tap on +CamHD ID found and tap again
on Add.
 If the above step doesn't work, connect the smartphone to the router, Login in
the App, touch [
you will see the camera you are setting, click Next and select the wireless
network of your router, insert the password and click on Configure. After a few
seconds, if the
Configuration" to indicate successful connection. The WLAN LED is now fixed
green.
+CamHD7000 By Sound Wave
 Connect the power supply to the mains and then to +Cam HD. After a few
seconds the WLAN LED on the back, starts flashing. Touch on [
right, next to the words My+CamHD and touch Add by Sound Wave. Keep
], select Add AP Device, tap the ID of the camera found,
parameters are
[+CamHDOutdoor7000] The Outdoor devices have not
speaker/LED so they cannot reproduce voice message or
report faults by flashing.
correct, you will
ENG
] touch on Scan
hear, "Succesfull
]at the top