Change Picture And Sound Settings - BEOVISION 11-40 User Manual

Select sound modes
The television has several sound modes optimised
for different types of programmes.
In the SOURCE LIST SETUP menu, you can, for
each source, set up a sound mode to be used
each time you activate this source.
Select picture modes
You can activate different picture modes to use for
different types of programmes. When you select a
picture mode for a source, it is only saved until
you switch off the television or switch to a
different source.
In the SOURCE LIST SETUP menu, you can, for
each source, set up a picture mode to be used
each time you activate this source.
Select picture format
In the SOURCE LIST SETUP menu, you can, for
each source, set up a picture format to be used
each time you activate this source. You can also
select a different picture format temporarily.

Change picture and sound settings

While you watch television, you can adjust the sound and picture settings. See the
online guide on www.bang-olufsen.com/guides for more information about these
settings.
LIST SOUND 1–9
Bring up sound modes on the
television screen and select mode.
If you remember the number of the
mode you want, press 1-9 after
SOUND
LIST 1–3
PICTURE
Bring up picture modes on the
television screen and select mode.
If you remember the number of the
mode you want, press 1-3 after
PICTURE
LIST 1–6
FORMAT
Bring up picture formats on the
television screen and select format.
If you remember the number of the
format you want, press 1-6 after
FORMAT
Step between modes On Beo6, select between available
sound modes, for example Speech
On Beo6, select between available
Step between modes
picture modes, for example, Movie
On Beo6, select between available
Step Move the
picture formats, for example Auto
between picture, if
formats possible
19
Sound ... Speech
Picture... Movie
Picture... P.Format Auto