BEOVISION 11-40 User Manual page 17

3D modes
Select the 3D mode that matches the signal sent
out by the programme provider.
2D modes
Select the 2D mode that matches the signal sent
out by the programme provider.
Automatic change of mode
If automatic 3D signalling is no longer available,
the TV automatically switches to the last used
mode for the current source. At channel and
source change, the TV switches to STANDARD 2D.
SIDE BY SIDE 3D
Converts side-by-side 3D
signal into full screen 3D
representation by scaling
two pictures horizontally
STANDARD 2D
Shows an ordinary 2D
TV picture without any
conversion.
Dual screen If two sources are brought up on the screen at the same time or if teletext is brought up on one side
and a source on the other, the TV will always display a 2D mode.
Subtitles Subtitles may not always be supported.
TOP/BOTTOM 3D
Converts top/bottom 3D
signal into full screen 3D
representation by scaling
two pictures vertically
SIDE BY SIDE 2D
Converts side-by-side 3D
signal into full screen 2D
representation by scaling
one picture horizontally
17
TOP/BOTTOM 2D
Converts top/bottom 3D
signal into full screen 2D
representation by scaling
one picture vertically