Seat Adjustment; Steering Control Lever Adjustment - HUSTLER FasTrak Operator's Manual

When mounting blades, rotate them after installation to
ensure blade tips do not touch each other or sides of the
mower.
Mower Blade Options
The following is a list of the approved mower blade options
that are available from Hustler
mower.
Use only genuine Hustler
ensure that original standards are maintained.
Failure to use approved blades could lead to blade
breakage which could result in death, injury or
property damage.
48" Rear Discharge Deck
601123
796623
796631
48" Side Discharge Deck
601014
795757
796623
796631
54" Side Discharge Deck
601012
797696
797704
797712

Seat Adjustment

IMPORTANT: Any maintenance operation that requires
the removal of safety covers must be performed by a trained
service technician.
605596CE
Turf Equipment for this
®
replacement blades to
®
BLADE, 16.50-L-F-CW
BLADE, 16.50"-MUL-F-CW
BLADE, 16.50"-GAT-F-CW
BLADE, F16.50-L-F-CW
BLADE, F16.50"-H-F-CW
BLADE, 16.50"-MUL-F-CW
BLADE, 16.50"-GAT-F-CW
BLADE, F18.50"-L-F-CW
BLADE, F18.50"-H-F-CW
BLADE, 18.50"-MUL-F-CW
BLADE, 18.50"-GAT-F-CW
The seat on the mower can be adjusted forward and rear-
ward by sliding the seat release lever until a comfortable
operating position is attained. Figure 4-12
A. Seat release lever

Steering Control Lever Adjustment

The steering control levers can be adjusted for operator
comfort.
A. To pivot the upper control levers forward or rearward,
loosen the cap screws that attach the upper control
lever to the lower lever. Then, pivot the upper control
lever. Tighten the cap screws. Figure 4-13
B. To lower and raise the control levers, remove the cap
screws. Slide the upper control lever up or down and
align the holes in it with the holes in the lower lever.
Re-install the cap screws and tighten.
The steering control levers should be adjusted so that they
align with each other when in the neutral position.
4-7
A
Figure 4-12
REV C