7.1.2.
Special Modes Setting
Mode name
Rating password
The audiovisual level setting password is
initialized to Level 8.
Service Mode
Setting every kind of modes for servicing.
*Details are described in 7.1.3. (BD) Service
Mode at a glance.
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The player's history data has
been cleared.] is displayed for five seconds.
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
Forced power-off
When the power button is not effective while
power is ON, turn off the power forcibly.
Item
Description
FL display
Display in P-off mode.
20
Key operation
Front Key
While the unit is on, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
[
]
Repeatedly press
on the
remote control or [POWER] on the
unit until "03 VL" is displayed on the
unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Turn the power off.
Press the [5] [9] and [R] button
simultaneously for five seconds,
then [70 RET] is displayed on FL.
[
]
Press the
button to select
until [80 SRV] is displayed on FL.
Press the [OK] button .
*The command is transmitted by
attached remote control.
When the power is on, disc is not
in tray, press and hold [6], [7] and
[Y] on the remote control at the
same time for more than 5 seconds.
- "50 RET" is displayed on the unit's
disply.
[
]
Repeatedly press
on the
remote control or [POWER] on the
unit until "51 NOP" is displayed on
the unit's display.
Press and hold [STOP] on the
remote control until "52 BRE" is
displayed on the unit's display.
Press [OK] on the remote con-
trol or [OPEN/CLOSE] on the unit.
While the unit is off, press and
hold [OK], [B] and [Y] on the remote
control at the same time for more
than 5 seconds.
- "00 RET" is displayed on the unit's
display.
[
]
Repeatedly press
on the
remote control or [POWER] on the
unit until "06 FTO" is displayed on
the unit's display.
Press [OK] on the remote control
or [OPEN/CLOSE] on the unit.
Press [POWER] key over than 10
seconds.