Mercedes-Benz GUARD S 500 Supplement To Operators Manual page 15

Guard operation
Windows
To affix labels, stickers and adhesive fas-
tening devices to the inside of windows,
use a mounting patch (located in the man-
ual pouch).
Affixing the mounting patch
Clean windshield in the intended area,
preferably above the windshield glass
certification markings on the driver's
side or just above the MB Signature La-
bel on the passenger side. Clean with a
mild soap and water solution to remove
any dirt or grease. Do not use ammo-
nia-based glass cleaner on inside of
windows. This could damage the pro-
tective plastic layer. Do not scrub with
any abrasive materials. Dry area using
only a grit-free chamois cloth and ap-
plying light pressure only.
Leave the mounting patch in its original
size. Do not custom-size the patch by
trimming its edges or cutting it. If the
label, sticker or fastening device you
14
wish to affix is larger than the mounting
patch, use an additional mounting
patch.
Remove backing from one or more
patches and apply patch to the intend-
ed area immediately to ensure adhe-
sive retension. Make sure that the top
and bottom edges of the patch are par-
allel. Make sure that all edges are firm-
ly affixed to the windshield. Do not use
any sharp objects to press patch down.
Apply sticker or fastening device to the
patch, centering it within the patch's
perimeter.
Warning!
The mounting patch should be affixed on the
windshield only.
Place the patch and any labels, stickers and
fastening device you wish to affix on the
patch in such a way that they do not limit the
driver's field of vision.
Removing the mounting patch
Remove mounting patch carefully with
your fingers. Do not use razor blades or
other sharp objects and do not scratch
with fingernails.
Clean windows.
Warning!
Removal of the patch will result in irrepara-
ble damage to the patch and any la-
bels/stickers affixed to it. State motor
vehicle regulations require that after remov-
al, inspection, registration and any other of-
ficial stickers unique to a vehicle cannot be
G
in a condition to be transferred to and used
on another vehicle. The mounting patch was
designed to comply with such regulations.
Both patch and any labels/stickers affixed
to it are irreparably damaged when re-
moved.
G