USA SPECS PA11-VW6 Owner's Manual page 7

Ipod to vw car stereo interface
Hide thumbs Also See for PA11-VW6:
Table of Contents

Advertisement

3-2 Instruction of
To retain your SAT reception, three wires on factory SAT connector need to be moved to the
white connector on
Step 1. Unplug the 12-pin blue color factory SAT connector at the back of the radio.
Step 2. Reference the drawing below to disassemble the connectors. Pushing the inner piece of
the connector with a small tool through the open hole at the side of connector.
At meantime, push the horizontal bar on the other side of connector upward to release the
latch. The inner piece of the connector will slid out.
Step 3. Referrnce the drawing below, pull out the wire at pin #1 on factory SAT connector with
a tool. Reference the drawing below, raise the key on the pin and insert it into pin #1 of
white connector on
Step 4. Referrnce the drawing below, pull out the wire at pin #3 on factory SAT connector with
a tool. Reference the drawing below, raise the key on the pin and insert it into pin #3 of
white connector on
Step 5. Referrnce the drawing below, pull out the wire at pin #7 on factory SAT connector with
a tool. Reference the drawing below, raise the key on the pin and insert it into pin #7 of
white connector on
Step 6. Pull out the wire at pin #7 of factory SAT connector and insert it into pin #7 of white
connector on
Step 7. Assemble the white connector on
piece.
Step 8. Plug the white connector on
TO iPod
REAR VIEW
AUX input
Back of car radio
SAT Receiver
Box
Step 1:
Unplug factory SAT
connector from the
Step 4/5/6: Pull out wires at pin #1,#3,#7
back of car radios.
and insert into pin #1,#3,#7 of black inner piece
of white connector at CAS-VW6.
Cable Installation for VW Equipped with SAT Receiver.
cable. Please follow the steps below to accomplish the installation.
connector.
connector.
connector.
cable.
cable CAS-VW6 to the back of radio again.
CB-PA14
-7-
cable by push the inner piece into the outer
2-POSITION DIP SWITCH
ON: when switch is at
bottom position
CONNECT
TO RADIO
FRONT VIEW
TO RADIO
Back of car radio
White
connector
Step 8: Plug CAS-VW6 to
the back of car radio again
1 2
Blue
connector

Advertisement

Table of Contents
loading

Related Products for USA SPECS PA11-VW6

Table of Contents