Table of Contents
Advertisement
Section 3. INSTALLATION
3-1 Instruction of
Step 1- Remove radio from the dash.
Step 2- Plug the round din plug on CAS-VW6 to PA11-VW6 interface adaptor where it is labeled
"RADIO" .
Step 3-a- Plug the WHITE or BLUE (depending on whichever one fits) connector on CAS-VW6
cable to radio's CD changer connector. (If a CD changer exists, disconnect it first.)
Step 3-b- Connect the BLACK color ground wire on CAS-VW6 cable to radio's metal chassis.
Step 4-a- Connect the audio output of your auxiliary devices to AUX input jack on PA11-VW6
adapter box if the additional AUX option is selected by setting the DIP swich #1 to
"OFF" position.
Step 4-b- Set the DIP switch #2 to "OFF" position only if the Direct Mode is preferred.
Step 5- Plug CB-PA14 cable to PA11-VW6 adaptor box where it is labeled "
Step 6- Reinstall radio to the dash.
WARNING!!
Use only the
connection cable which comes with PA11-VW6 interface adaptor.
connection cables from other sources may look similar, but they may damage your
CONNECT
TO RADIO
FRONT VIEW
TO RADIO
CAS-VW6
GROUND
WIRE
Cable Installation for VW without SAT
CB-PA14
CAR AUDIO
-6-
".
REAR VIEW
TO iPod
Player or Satellite Receiver
.
Advertisement
Table of Contents
