Display Settings - JVC KD-R980BTS Instruction Manual

DISPLAY SETTINGS

KD-R980BTS
1
Press and hold .
2
Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Dim the illumination.
OFF: Dimmer is turned off.
ON: Dimmer is turned on. Brightness changes to [NIGHT] setting.
( [BRIGHTNESS])
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: PM 6:00 ; [OFF]: AM 6:00)
DIMMER AUTO: Dimmer turns on and off automatically when you turn off or
on the car headlights. *
BRIGHTNESS Set the brightness for day and night separately.
1 DAY/NIGHT: Select day or night.
2 Select a zone.
3 Set the brightness level (LEVEL 00 to LEVEL 31).
(Default: [DAY]: LEVEL 31 ; [NIGHT]: LEVEL 15)
26
ENGLISH
KD-R880BT
.
1
2
TEXT SCROLL * SCROLL ONCE: Scrolls the display information once. ; SCROLL
AUTO: Repeats scrolling at 5-second intervals. ; SCROLL OFF: Cancels.
COLOR (for KD-R980BTS)
PRESET Select color for button illumination and display illumination separately.
Default color: ALL ZONE: [COLOR 08], DISP ZONE: [COLOR 01],
ZONE 1: [COLOR 08], ZONE 2: [COLOR 46]
1 Select a zone.
2 Select a color for the selected zone.
Default: XX
DAY COLOR Store your own day and night colors for different zone.
1 Select a zone.
2 RED/GREEN/BLUE: Select a primary color.
3 00 to 31: Select the level.
Repeat steps 2 and 3 for all the primary colors.
NIGHT COLOR
• Your setting is stored to [USER] in [PRESET].
• If [00] is selected for all primary colors for [DISP ZONE], nothing appears
COLOR GUIDE ON: Changes the button illumination and display illumination when
settings are performed on menu and list search. Display zone will
automatically change depending on volume level. ; OFF: Cancels.
[NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car's
headlight.
* 1
The illumination control wire connection is required. ( 35)
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
* 3
If one of these color pattern is selected, the [ZONE 1], [DISP ZONE], [ZONE 2] illumination
color will change to the default color.
• COLOR 01 to COLOR 49
• USER: The color you have created for [DAY COLOR] or
[NIGHT COLOR] is shown.
• COLOR FLOW01 to COLOR FLOW03: Color changes at different
speeds.
• GROOVE/TECHNO/EMOTION/RELAX/SPECTRUM/SWEEP/POP:
The selected color pattern is shown.*
1
[ALL ZONE] is selected in step .)
on the display.
3
(Selectable only when