JVC KD-DV5606 Instructions Manual page 27

Category Menu item
FADER * 5
BALANCE
LOUD
Loudness
VOL ADJUST
Volume adjust
AUX ADJUST *
Auxiliary adjust
BEEP
Key touch tone
AMP GAIN * 7
Amplifier gain
control
AM *
8
AM station
AUX IN *
9
Auxiliary input
* 5
If you are using a two-speaker system, set the fader level to <00>.
6
* Displayed only when <AUX IN> is set to <AUX ON>.
* 7
The volume level automatically changes to "VOLUME 30" if you change to <LOW POWER> with the volume level
set higher than "VOLUME 30."
* 8
Displayed only when any source other than "
9
* Displayed only when any source other than "
Selectable setting, [reference page], Initial: Underlined
R06 – F06 [ 00 ] : Adjust the front and rear speaker output balance.
L06 – R06 [ 00 ] : Adjust the left and right speaker output balance.
• LOUD ON
• LOUD OFF
VOL ADJ –05 —
VOL ADJ +05
[ VOL ADJ 00 ]
6
AUX ADJ 00 —
AUX ADJ 05
• BEEP ON
• BEEP OFF
• LOW POWER
• HIGH POWER
• AM ON
• AM OFF
• AUX ON
• AUX OFF
AM
" is selected.
AUX IN
: Boost low and high frequencies to produce a
well-balanced sound at a low volume level.
: Cancels.
: Preset the volume adjustment level of each source (except
FM), compared to the FM volume level. The volume level
will automatically increase or decrease when you change
the source.
• Before making an adjustment, select the source you
want to adjust.
• "VOL ADJ FIX" appears on the display if "
as the source.
: Adjust the auxiliary input level to avoid the sudden
increase of the output level when changing the source to
external component connected to the AUX input jack on
the control panel.
: Activates the keypress tone.
: Deactivates the keypress tone.
: VOLUME 00 – VOLUME 30 (Select if the maximum power
of each speaker is less than 50 W to prevent damaging the
speaker.)
: VOLUME 00 – VOLUME 50
AM
: Enable " " in source selection, [6].
AM
: Disable " " in source selection.
AUX IN
: Enable " " in source selection, [6].
AUX IN
: Disable " " in source selection.
" is selected.
FM
" is selected
SETTINGS 27