Arturia MiniLab Mk II User Manual page 22

From here you can name the Macro, select parameters to control, and set the amount of
control (positive or negative). To enable or disable the individual parameter, click Assign. To
clear the parameter selection, click the X.
Select a parameter
Click on the second field from the top and a sub-window will open. It allows you to specify
whether you want to control a parameter for Part 1, Part 2, or the Live tab.
Within each of those selections is a menu from which you can select the parameter you
want to control.
Name the Macro
Click the large green field to give the Macro a suitable name. Hit Enter and the name will
appear under the Macro encoder.
Remember to click ASSIGN to activate control of that parameter. Click the X to reset the
parameter selection and start over.
3.4.2.2. Pads 12-13: unassigned
We've left these pads unassigned for the time being.
3.4.2.3. Pad 14: Clear all filters
It's possible to specify several characteristics with encoder 9 when you're looking for a
particular type of sound. In the example below, we are looking for an ambient, complex,
evolving sound from three different Arturia instruments:
18 Arturia - User Manual MiniLab MkII - MiniLab MkII and Analog Lab Lite