Max A/C Mode (For Type B And C); Temperature Control - Subaru impreza 2017 Owner's Manual

4-8
Climate control/Manual climate control operation
(Heat): Foot outlets, both side outlets of
the instrument panel and some through
windshield defroster outlets (A small
amount of air flows to the windshield and
both side windows to prevent fogging.)
(Heat-def): Windshield defroster outlets,
foot outlets and both side outlets of the
instrument panel (Refer to Defrosting
4-10.)
(Defrost): Windshield defroster outlets
and both side outlets of the instrument
panel (Refer to Defrosting
MAX A/C mode (for type B
and C)
For quicker cooling, press the MAX A/C
button.
When the MAX A/C mode is on, the
following settings will be changed auto-
matically.
. The air conditioner will turn on.
. The temperature will be set on the
lowest.
. The fan speed will be set on the
maximum speed.
. The air inlet will be set to recirculation.
. The air flow mode setting will be set to
ventilation mode.
To turn off MAX A/C mode and return the
previous setting, press the MAX A/C
button again.

Temperature control

Turn the temperature control dial to set the
preferred interior temperature.
NOTE
The controllable temperature range
may vary depending on the regional
specifications of the vehicle.
SYNC mode (type C)
4-10.)
When the SYNC mode is turned on, both
the driver s and passenger s side tem-
peratures are synchronized using the
driver s side temperature control dial.
Press the SYNC button to turn on the
SYNC mode. The SYNC button indicator
will illuminate.
Press the SYNC button again or turn the
passenger s side temperature control dial
to cancel the SYNC mode. The SYNC
button indicator will not illuminate. In this
case, temperature control on the driver s
side and passenger s side is separate.