Fuel Gauge - Subaru impreza 2017 Owner's Manual

3-10
Instruments and controls/Meters and gauges
position.
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
The display can be switched as shown in
the following sequence by pressing the
TRIP RESET switch.
To set the trip meter to zero, select the A
trip or B trip meter by pressing the TRIP
RESET switch and keep the knob pressed
for more than 2 seconds.
CAUTION
To ensure safety, do not attempt to
change the function of the indicator
during driving, as an accident could
result.
NOTE
. If the connection between the com-
bination meter and battery is broken for
any reason such as vehicle mainte-
nance or fuse replacement, the data
recorded on the trip meter will be lost.
. If you press the TRIP RESET switch
when the ignition switch is in the
LOCK / OFF or ACC position, the
odometer/trip meter will light up. It is
possible to switch between the A trip
meter and B trip meter indications
while the odometer/trip meter is lit up.
In addition, it is possible to reset the
trip meter by pressing and holding the
TRIP RESET switch.
The indicators will turn off when:
The TRIP RESET switch is not
operated for approximately 10 sec-
onds.
The driver s door is opened and
then closed.

Fuel gauge

1) TRIP RESET switch
2) Type A combination meter
3) Type B combination meter
The fuel gauge is displayed when the
ignition is in the ON position, and it
shows the approximate amount of fuel
remaining in the tank.
The gauge indication may change slightly
during braking, turning or acceleration due
to fuel level movement in the tank.
NOTE
. You will see the
sign in the fuel
gauge. This indicates that the fuel filler
door (lid) is located on the right side of
the vehicle.
. If you press the TRIP RESET switch