After Using The Appliance; Cleaning And Servicing; Optional Accessories - Bosch MUZ6FW series Operating Instructions Manual

Securing the attachment
to the base unit
Place the appliance on its back

as indicated.
Open the locking lever (Fig. –5).

Place the mincer attachment, with foot

pointing downwards, on the drive for the
bowl and throw the locking lever.
Firmly screw threaded ring.

Attach filling tray.

Insert pusher into the filling shaft.

Operating the appliance
Risk of injury from rotating
tools/sharp blades!
While operating the appliance, never
reach into the filling shaft.
Work with the pusher only.
Change tools only when the drive
is at a standstill. Do not take hold
of blades by the cutting surfaces.
Warning!
Do not process bones.
Place a bowl or plate under the outlet

opening.
Place the food to be processed

in the filling tray.
Use the pusher to push in ingredients.

Set rotary knob to setting 4.


After using the appliance

Switch off the appliance with the rotary

switch.
Remove mains plug.

Open the locking lever (Fig. –5)

and remove the mincer by screwing
it off the appliance.
Disassemble the mincer attachment

(in reverse sequence to assembly).
Clean parts.


Cleaning and servicing

Risk of electric shock
Before working on the appliance, pull out
the mains plug.
Robert Bosch Hausgeräte GmbH
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Metal mincer parts are not dishwasher-proof.
Loosen threaded ring and disassemble

attachment.
Wash metal mincer parts by hand and

dry immediately.
Filling tray and pusher are dishwasher-

proof
Lubricate dried perforated disc and

blades with cooking oil to protect
against corrosion.

Optional accessories

(available from dealers)
Warning!
Always assemble the accessories without
blades and perforated discs.
Follow all instructions mentioned above
concerning "For your safety", "After work"
or "Cleaning and servicing".
Perforated disc sets
MUZ7LS2/LS3/LS4
Pasta attachments made of metal
MUZ7NV1
Fruit press attachment MUZ7FV1
Fig. 
for pressing e.g. berries, tomatoes, apples,
pears, rosehips (cook rosehips for 1 hour
before pressing).
Extracted fruit pulp is especially suitable
for making jam.
Preparation as described for mincer

attachment. Note required individual
parts and sequence when assembling
the fruit press attachment.
First undo the fastening screw as far as is

required to allow the pulp to flow out while
still moist.
Then adjust the fastening screw until the

pulp flows out with the required moisture.
Place the food to be processed in the

filling tray.
Use the pusher to push in ingredients.
Set rotary knob to setting 4.

en
7