Assigning A Function To The Foot Switch; Modulation Depth - Technics SX-KN200 Owner's Manual

Part IV
Function setting mode
Assigning a lunction to the loot switch
If the SZ-P1 foot switch (sold separately) is con-
nected, the default function assigned to the foot
switch is the rhythm start/stop; however, you can
assign a different function to the foot switch.
Connection
FOOT
SW o
...
T
1. Press the SUB BALANCE/MIDI button two
times.
SUB BALANCE!
MIDI
o
o
2. While "M I d" (KN200) or "M I d I "
(KN400) appears on the display, use the
TEMPO's SLOW or FAST button to select
" FUn " (function) on the display.
o
FAST
]
TEMPO
O
(M I()jPART)
SLOW
• The indicator flashes.
3. Use the POLY (KN200) or POLY 1 (KN400)
BALANCE buttons to assign the desired func-
tion to the foot switch.
Display Function
SUS
Sustain on/off
CLd
Glide effect*
I::EC
TECHNI-CHORD on/off
51::,
START/STOP
F IL
FILL IN
End
INTRO & ENDING
*Glide effect: As long as the foot switch is
depressed, the pitch of the pressed keyboard
keys is lowered by a half-tone; when the foot
switch is released, the pitch returns to normal.
The glide effect works for the following sounds:
GUITAR, JAZZ GUITAR, SOLID GUITAR, ROCK
GUITAR, MUTE GUITAR, HAWAIIAN GUITAR,
BANJO, VIOLIN, BRASS, TRUMPET, SYNTH
BRASS 1, 2, TROMBONE, FRENCH HORN,
TENOR SAX, ALTO SAX, HARMONICA,
CLARINET, PAN FLUTE, FLUTE, WHISTLE,
SPECIAL 1, 2, 3, 5, 6
4. Press the SUB BALANCE/MIDI button to turn
it off.
SUB BALANCE!
MIDI
o
o
Part IV
Modulation depth
• KN200
You can set the vibrato depth for modulation data
received through the MIDI terminals.
• KN400
You can set the vibrato depth of this instrument's
MODULATION control and for modulation data
received through the MIDI terminals.
• The modulation depth can be set inde-
pendently for each of these parts:
KN200: POLY
KN400: POLY 1, POLY 2, ACCOMP 1, 2, 3,
BASS
1. Press the SUB BALANCE/MIDI button two
times.
SUB BALANCE!
MIDI
o
o
2. While "M I d" (KN200) or "M I d I "
(KN400) appears on the display, use the
TEMPO's FAST or SLOW button to display the
desired part name on the display.
o
FAST
]
TEMPO
O
(MIDI PART)
SLOW
• The indicator flashes.
Function setting mode
3. Use the POLY (KN200) or POLY 1 (KN400)
BALANCE buttons to adjust the vibrato depth.
• The settable range of the vibrato depth is 0-9.
KN200 KN400
POLY POLY 1
0+
0-
ACCOMP2&3
ACCOMP 3
• The higher the number, the more pronounced
the vibrato.
4. Repeat steps 2 and 3 to set the vibrato depth
for the other parts.
5. When the vibrato depth has been set for all the
parts as desired, press the SUB BALANCE/
MIDI button to turn it off .