Honeywell ADEMCO 5821 Installation Instructions page 4

SPECIFICATIONS
Power: 3V lithium battery
(Duracell DL123A, Panasonic CR123A)
CAUTION: Risk of fire, explosion, and burns.
recharge, disassemble,
(100°C) or incinerate. Dispose of used batteries
properly. Keep away from children.
Operating Temperature: 14°F (-10°C) to
Operating Voltage: 3.2VDC
Dimensions: 3.1" length, 1.6"wide, 1.0" depth
Sensor Parameters:
Cold Temperature (Freeze) Detector: 45°F (7°C)
Warm Temperature Detector: 75°F (24°C)
Hot Temperature Detector: 95°F (35°C)
Refrigerator Failure Detector: 42°F (6°C)
Freezer Failure Detector: 10°F (-12°C)
Hysteresis 3°F (-16°C)
¦¦¦ :
Flood Sensor: ¼ inch of water covering the probe
Response Time Tolerance
Temperature Measurement Accuracy (internal temp.
sensor or external temp. probe): ±3°F (-16°C)
¦¦¦ Hysteresis is the temperature difference between "fault"
and "restore" points.
¦¦¦¦ The Response Time Tolerance is the time duration
necessary for the device to respond to a "fault" or
"restore" condition. This time does not take into
account the time necessary for the probe and circuitry
to equalize to the ambient temperature. This feature
prevents false alarms due to open doors and other
transitory conditions.
For the latest documentation and online support information, please go to:
ÊK9947V4$Š
K9947V4 9/15 Rev. A
Do not
heat above 212°F
104°F (+40°C)
:+50%, -20%
¦¦¦¦
SUPPORT & WARRANTY
https://mywebtech.honeywell.com/
For the latest warranty information, please go to:
www.honeywell.com/security/hsc/resources/wa.
2 Corporate Center Drive, Suite 100
Copyright
Regular maintenance and inspection (at least annually) by the
installer and frequent testing by the user are vital to continuous
satisfactory operation of any alarm system.
The installer should assume the responsibility of developing and
offering a regular maintenance program to the user as well as
acquainting the user with the proper operation and limitations
of the alarm system and its components parts.
Recommendations must be included for a specific program of
frequent testing (at least weekly) to ensure the system's proper
operation at all times.
This device complies with Part 15 of the FCC rules and RSS-210
of Industry Canada. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Unauthorized changes or modifications could void the user's
authority to operate the equipment.
Cet appareil est conforme à la partie 15 des règles de la FCC &
de RSS-210 des Industries Canada. Son fonctionnement est
soumis aux conditions suivantes: (1) Cet appareil ne doit pas
causer d'interférences nuisibles. (2) Cet appareil doit accepter
toute interférence reçue y compris les interférences causant
une réception indésirable.
P.O. Box 9040, Melville, NY 11747
©
2008 Honeywell International Inc.
www.honeywell.com/security
TO THE INSTALLER
FCC / IC STATEMENT
Warranty
MyWebTech