Cisco ASA 5585-X Quick Start Manual page 4

Cisco ASA 5585-X Quick Start Guide
1
2
1 (Optional) Slot 1 module, multiple types available.
3 ASA SSP Management 0/0 interface (RJ-45)
2. If you do not use the Management 0/0 for ASA management, you need to configure a data interface for
management. Do one of the following, then recable the computer so it is on the new management network:
— Connect to the console port to configure a data interface for management with CLI. See the Getting Started
chapter in the general operations configuration guide for detailed steps.
— Temporarily connect to Management 0/0, launch ASDM (see
data interface for management.
3. If you are using the fiber interfaces, you need an SFP+ module for 10-Gigabit Ethernet (a license may be
required) or an SFP module for Gigabit Ethernet. (SFP or SFP+ modules are not included.)
The interfaces available depend on your model. See the
4. Check the LINK/ACT indicators to verify interface connectivity.
5. For software module configuration, see the
IPS quick start
5. Launch ASDM
Using ASDM, you can use wizards to configure basic and advanced features. See the
Cisco.com for the requirements to run ASDM.
Procedure
1. On the computer connected to the ASA Management 0/0 interface, launch a web browser.
2. In the Address field, enter the following URL: https://192.168.1.1/admin. The Cisco ASDM web page
appears.
3. Click one of the available options: Install ASDM Launcher, Run ASDM, or Run Startup Wizard.
4. Follow the onscreen instructions to launch ASDM according to the option you chose. The Cisco ASDM-IDM
Launcher appears.
Note: If you choose to click Install ASDM Launcher, in some cases you need to install an identity certificate
for the ASA and a separate certificate for the ASA FirePOWER module according to
Certificate for
7 6 5 4
SFP1 SFP0
7 6 5 4
SFP1 SFP0
Unsecure Network
guide.
ASDM.
0
1
3 2 1 0 1 MGMT 0
USB
0
1
3 2 1 0 1 MGMT 0
USB
3
Secure Network
2 Slot 0 ASA SSP
5. Launch ASDM, page
hardware guide
ASA FirePOWER quick start
5. Launch ASDM
RESET
AUX CONSOLE
RESET
AUX CONSOLE
Management PC
4), and configure a
for more information.
guide, ASA CX quick start
ASDM release notes
Install an Identity
guide, or
on
4