Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Parkmate RVM-073A
Summary of Contents for Parkmate RVM-073A
- Page 1 7.3”SUPER WIDE LCD SCREEN REAR VIEW MIRROR MONITOR RVM-073A User Manual...
-
Page 2: Specifications
This state of RVM-073A the art Parkmate product is packed with features including a 7.3” monitor embedded into the rear view mirror that displays the video feed from up to three installed rear or side view cameras. -
Page 3: Product Diagram
Bracket Cable shield WIRING OPTIONS To install the RVM-073A connect the Rear View Mirror Monitor to the supplied harness, then connect the harness to the wiring of the vehicle as per the diagram below. Black to GND Red to ACC +12V... - Page 4 You will need to remove your original mirror and replace it with the supplied RVM-073A mirror and bracket to correctly install this product. The generic mount used by the RVM-073A is designed to fit most vehicles. Please check that your vehicle uses a compatible mount before attempting to install the RVM-073A.
- Page 5 HOW TO INSTALL THE RVM-073A REAR VIEW MIRROR ON YOUR VEHICLE’S WINDSCREEN Line up the mounting bracket with the universal mount Insert the bracket into the top of the Slide the bracket into position in the mount aligning both edges...
- Page 6 MOUNTING BRACKET/ARM The RVM-073A comes with a generic mounting bracket suitable for most vehicles. If your vehicle’s mounting plate is not compatible with the generic bracket provided, Parkmate has a range of vehicle specific mounting brackets available at www.parkmate.com.au or through your local Parkmate dealer.
- Page 7 (for example the road cones used in the diagram on page 8) to assist in the calibration of the on screen guidelines. To calibrate the guidelines ensure that the RVM-073A is correctly installed as per the installation guide and put your vehicle into reverse. Please note: The reverse guidelines will not appear unless the reverse gear of your vehicle is selected.
- Page 8 The optimum operating distance for the remote control is 0.5 metres to 1 metre. When using the remote control, please ensure that you are pointing the remote at the RVM-073A. Please note: if your installed camera has integrated guide lines, you will need to either disable them on the camera or on the mirror monitor.
-
Page 9: Image Settings
IMAGE SETTINGS REMOTE CONTROL The menu settings can be edited and adjusted using the remote control. IMAGE SETTINGS Pressing the button will show the image setting menu. In this menu you can use the button to cycle between the Brightness, Colour, Contrast, and Scale menus. -
Page 10: Display Modes
(UP) or (DOWN) button on the remote control. DISPLAY MODES The RVM-073A has multiple display modes that are able to be displayed in different situations. Driving with side cameras installed If you have side mirrors installed on your vehicle you can display the video feed... - Page 11 PRECAUTIONS FOR USE OF MIRROR MONITOR 1. The Mirror monitor is made of glass. Avoid dropping the RVM-073A mirror monitor from any height or subjecting the device to impact or shock. 2. Do not apply excessive force to the mirrored or monitor surface as this may damage the screen causing colours to be displayed incorrectly.
-
Page 12: Warranty Terms And Conditions
All costs involved in claiming this warranty, including the cost of the retailer sending the product to Directed Electronics, will be borne by you. Directed Electronics Address: 44 Translink Drive, Keilor Park Victoria Australia 3042 Ph: +61 03 8331 4800 Email: service@directed.com.au www.parkmate.com.au www.directed.com.au www.parkmatehd.co.nz www.directed.co.nz...