Select Offline and select the model as shown below..
Then, the user is able to choose [New/Online/Format/Eject]. Select Format and formatting progress as
shown below.
After formatting, select the model again and set as Online.
Format is completed.
6-5. PTZ
Set the PTZ camera connected to the system. {Menu}
[Figure 5-41. Storage Format]
[Figure 5-42. Storage formatting in progress message]
It may take time during formatting.
[Figure 5-43. PTZ Window]
54
{Setup}
{PTZ}.
Need help?
Do you have a question about the MM-1648 and is the answer not in the manual?