Advertisement
, If you don't press either the h or min buttons within 5 seconds,
the coffee maker will revert to "normal", and the time will show.
You'll have to press the PROG button, and start again.
29 Press and release the v button.
30 The v light will come on, and "AUTO" will show on the display.
31 When the set time is reached, the v light will go off, the 2 light
will come on, the display will change from "AUTO" to "ON", and
brewing will start.
32 To cancel the timer before it starts brewing, press the v button.
33 To stop the coffee maker while it's brewing, press the 2 button.
C FINISHED?
34 Press and release the 2 button.
35 The 2 light will go off.
36 Unplug, and let the appliance cool down fully before cleaning, or
for about 10 minutes before refilling.
C AUTO SHUT-OFF
37 About 2 hours after brewing, the coffee maker will shut down.
The hotplate will go off, the 2 light will go off, and "ON" will
disappear from the display.
38 If left for much more than an hour, chemical changes in the
coffee liquor start to affect the flavour. It's best to pour it away
and make a fresh pot.
C BREW STRENGTH AROMA
39 Use this feature if you're brewing less than 5 cups of coffee. It
slows the brewing process, so your coffee will have the same
strength as coffee from a full carafe.
40 You may hear the switch operating as it does this.
41 You may press the brew strength button AROMA before or
during the brewing process, to activate or deactivate the brew
strength feature.
42 Press the AROMA button to activate the brew strength feature,
the AROMA icon will show up on the display.
43 Press the AROMA button again to deactivate the feature.
5
Advertisement
