Registering Handset - Philips CD 1550 User Manual

beyond the operation range, the antenna
icon will blink.
Tip
When reaching the range limit and the
conversation becomes crackly, move
closer to the base.
4.3

Registering handset

The procedures described below are the
procedures that you will find in your
handset. The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be registered to
the base unit before you can use them. Up
to 4 handsets can be registered to one
base station.
1
Insert battery to power up the
handset. The LCD displays "
OK KEY TO REGISTER
<
2
Press
OK
displays "
HOLD LOCATOR KEY
".
DURING 5s
3
Within 5 minutes, press the locator
key on base station to start
registration.
4
If registration succeeds, the handset
returns to idle mode.
5
If registration fails, the LCD will
display "
PRESS OK KEY TO
". Repeat the process
REGISTER
again.
Getting started
PRESS
".
on handset, the LCD
13