Haier HTD1268 Service Manual page 18

Error message:Door is not properly shut 20s after program is started.
Troubleshooting:
Pushing the door to Check Whether Door
is properly shut or not
Y
Cut off the power and then turn on
again.Check the voltage between brown
wire and blue wire of door lock, is it
between AC 220-240V?
N
Check if the wire connecting door lock
N
Check the voltage between gray wire and
red wire of power driver PCB,
between AC 220-240V?
Error message:Drainage error, water not emptied within 4 min.
Troubleshooting:
Washer And Dryer
is it
220-240V
Page 17
Model:HTD1268 SERIES
N
Door lock is
Y
replacing,then make sure wire is
connected properly.
Connect the wire properly
Y
Power driver
N
PCB
broken and need