Installation - Haier HTD1268 Service Manual

Installation

Remove all the packing materials (including the
EPS base)to prevent vibration during use, as
shown in the right picture.Upon opening of the
package, water drops may be seen on the plastic
bag and the porthole. This is normal phenomenon
resulting from water test in the factory.
Check attachments and materials with reference to the following
Name
Operation
Qty
manual
Model
1
HTD1268
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Before use:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the
rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe
place for later use)
Adjusting the washing machine
There are adjustable feet under the bottom of the washing machine. Before
use, the washing machine should be adjusted, as shown in Fig. 3, so that it
is level.
Washer And Dryer
Water Drainage
Quality
hose holder
certificate
1 2
1
9
Model:HTD1268 SERIES
Plastic
Warrantly
card
plugs
Plastic plugs
1 3
Quality certificate
Drainage holder
Warrantly card
Operation
manual
Water hose
Fig
. 1
Fig.2
Fig.3