Timer Recording Radio Programs - Sony GMT-GP7 Operating Instructions Manual

Other operations
To Do this
1
Cancel the timer/ Press CLOCK/TIMER
activate the timer/ SELECT.
check the setting
2
Press ./> repeatedly
until "SELECT" appears,
then press ENTER.
3
Press ./> repeatedly
until "DAILY", "ON" or
"OFF" appears, then press
ENTER.
Change the setting Start over from step 1.
1
Cancel both Daily Press CLOCK/TIMER
Timer and Timer SELECT.
Recording 2
Press ./> repeatedly
until "OFF" appears, then
press ENTER.
Notes
• The Daily Timer setting or the Timer Recording
setting overlaps with part or all of another timer
setting.
• If you use the Daily Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
• If the system is on about 15 seconds before the preset
time, the Daily Timer will not be activated.
• You cannot use the optional component connected to
the MD (VIDEO) jacks as sound sources for the
Daily Timer.
• When the Daily Timer is set to "OFF", "SELECT"
does not appear. However, "SELECT" does not
appear when the Timer Recording is set to "ON".
Timer recording radio
programs
To timer record, you must first preset the radio
station (see "Presetting radio stations" on
page 12) and set the clock (see "Setting the
clock" on page 7).
Use buttons on the remote for the operation.
1
Tune in the preset radio station (see
"Listening to a preset station" on
page 13).
2
Press CLOCK/TIMER SET.
3
Press ./> repeatedly until "REC"
appears, then press ENTER.
"ON TIME" appears and the hour
indication flashes.
4
Set the time to start recording.
Press ./> repeatedly to set the hour,
then press ENTER.
The minute indication flashes.
Press ./> repeatedly to set the
minute, then press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
Timer Recording settings and the desired
station appear, then the original display
returns.
6
Load a recordable tape.
7
Press DIRECTION on the unit
repeatedly to select "g" to record on
one side or "h" (or "j") to record
on both sides.
8
Press N (or TAPE nN on the unit)
repeatedly to select the recording side.
If you select both sides recording or front
side recording, press N (or TAPE nN
on the unit) until "N" appears. If you
record on the reverse side, press N (or
TAPE nN on the unit) again until "n"
appears.
9
Press ?/1 to turn off the system.
continued
GB
19