Timer; Falling Asleep To Music; Sleep Timer; Waking Up To Music - Sony GMT-GP7 Operating Instructions Manual

Timer

Falling asleep to music

— Sleep Timer

You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Use buttons on the remote for the operation.
Press SLEEP repeatedly.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90MIN t 80MIN t ... t
10MIN t OFF
* The system automatically turns off in 240 minutes or
after the current CD or tape finishes playing.
Other operations
To
Check the
remaining time**
Change the time
to turn off
Cancel the Sleep
Timer function
** You cannot check the remaining time if you select
"AUTO".
Tip
You can use the Sleep Timer, even if you have not set
the clock.
GB
18
Press
SLEEP once.
SLEEP repeatedly to select the
time you want.
SLEEP repeatedly until "OFF"
appears.

Waking up to music

— Daily Timer

You can wake up to music at a preset time. Make
sure you have set the clock (see "Setting the
clock" on page 7).
Use buttons on the remote for the operation.
1
Prepare the sound source you want to
play.
• CD: Load a disc. To start from a specific
track, make a program (see "Creating
your own program" on page 10).
• TAPE: Load a tape (see "Playing a tape"
on page 15).
• TUNER: Tune in a radio station (see
"Listening to the radio" on page 13).
2
Adjust the volume.
3
Press CLOCK/TIMER SET.
4
Press ./> repeatedly until
"DAILY" appears, then press ENTER.
"ON TIME" appears and the hour
indication flashes.
5
Set the time to start playing.
Press ./> repeatedly to set the hour,
then press ENTER.
The minute indication flashes.
Press ./> repeatedly to set the
minute, then press ENTER.
6
Set the time to stop playing following
the same procedure as step 5.
7
Press ./> repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
8
Press ENTER.
The start time, the stop time, the sound
source, and VOLUME appear in turn, then
the original display returns.
9
Press ?/1 to turn off the system.