3
3
Enter the character string that is to be used as a prefix (up to 20 char-
acters).
–
For the procedure to enter characters, refer to "Entering Text" on
page 6-5.
4
Touch [OK].
–
To cancel changes to the setting, touch [Cancel].
The prefix is set.
5
Touch [Suffix].
The Suffix screen appears.
6
Enter the character string that is to be used as a suffix (up to 64 char-
acters).
–
For the procedure to enter characters, refer to "Entering Text" on
page 6-5.
7
Touch [OK].
–
To cancel changes to the setting, touch [Cancel].
The suffix is set.
8
Touch [Close].
3-96
Specifying Settings From the Control Panel
bizhub 750/600