Specifying Settings From the Control Panel
3.23
PSWC Settings
The use of PageScope Web Connection can be enabled or disabled.
!
Detail
Refer to "Items That Can Be Specified Using PageScope Web Connec-
tion" on page 4-2 for details on PageScope Web Connection.
To specify PSWC settings
1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-7 for more details.)
2
In the Network Setting screen, touch [0 Detail Setting].
3
In the Detail Setting screen, touch [5 PSWC Setting].
The PSWC Setting screen appears.
4
Touch [Enable] or [Disable].
5
Touch [OK].
The use of PageScope Web Connection is enabled or disabled.
Note
To cancel changes to the setting, touch [Cancel].
Reminder
To apply network setting changes, turn off the main power of the ma-
chine, wait 10 seconds, and then turn the machine on again.
bizhub 750/600
3
3-89