Mounting Hardware - SimpliPhi PHI2.6 Installation Manual

Mounting Hardware

The SimpliPhi Power Mounting Brackets (sold separately) are designed to secure one Smart-Tech
PHI2.6™
Battery to a load bearing surface. SimpliPhi Power Smart-Tech Batteries can be mounted in practically
any orientation (Terminals Up, Down, On Side). The brackets can be mounted directly to a wall or
can be arranged on strut channels for ease of positioning. A qualified installer should be familiar with
accomplishing this with the appropriate load bearing requirements.
Mounting Bracket Hardware is also included: 1/4-20 x 5/8" Hex Washer Head Machine Screw - Slotted.
18-8 Stainless Steel
For ease of measuring, arranging and mounting your PHI Smart-Tech Battery array, a drawing of the
PHI2.6™
Mounting Brackets with dimensions is provided (page 12):
During mechanical testing, individual Mounting Brackets were exposed to 200 pounds each of
PHI2.6™
downward pressure along the bracket's outer edge. During this test, a deflection of approximately 30
thousandths of an inch was measured. Combined bracket sets can easily bear weights in excess of 400
pounds. Bracket sets are designed to hold one Module, with a weight of 57.5 pounds.
PHI2.6™
PHI2.6™ Smart-Tech Battery Weight
PHI2.6™ Smart-Tech Batteries weigh 57.5 pounds. The Wall Mount Bracket Assemblies weigh 8 Pounds.
The SimpliPhi Power Mounting Brackets should be mounted into load bearing beams, studs or solid posts.
Check with your installer to select an appropriate wall space or surface.
PHI2.6™ Smart-Tech Battery Wall Mount + Bracket Dimensions
PHI2.6™ Battery
Width: 11.25''
Height: 13.5'' (including terminal height)
Depth: 9.5"
Weight: 57.5 Pounds
PHI2.6™ Battery with Bracket
Width: 15.5"
Height: 13.5" (including terminal height)
Depth: 10.44"
Weight: 65.5 pounds
SimpliPhi Power, Inc. | 420 Bryant Circle | Ojai, CA 93023, USA | +1 (805) 640-6700 | info@simpliphipower.com | SimpliPhiPower.com
| 11 |