Indicators; Connectivity Indicator - Bang & Olufsen Beoplay M5 User Manual

Indicators

EN H Connectivity indicator
– White (dim): Product is in standby mode.
– White (flashing): Product is booting up.
– White (solid): Connected to the network. The wireless
signal strength is high.
– Orange (solid): Connected to the network. The wireless
signal strength is medium.
– Red (solid): Connected to the network. The wireless signal
strength is low.
– Red (flashing): Network connection error.
– Blue (flashing): Product is in Bluetooth pairing mode.
– Blue (solid): Indicator turns solid blue shortly after
Bluetooth pairing is successful.
– Red (solid): Indicator turns solid red shortly when Bluetooth
pairing is unsuccessful.
I Product indicator
– Off: Product is in standby mode or switched off.
– White (flashing): Product is booting up.
– Red (solid): Both Indicators turn solid red shortly before
during factory reset.
– Red (flashing): Both Indicators flash red at the same time to
indicate that software update is in progress. Do not operate
the product or switch it off.
– Red (flashing): Firmware error. Disconnect the product
from the mains supply and reconnect it.
– Orange (flashing): Indicator is flashing orange when the
product is overheating and needs time to cool down.
17