Mounting Requirements - Plasma Made GUC 1314 Installation And User Manual

9. Mounting instructions
Assembly extractor hood
The extraction unit must be installed according to the guidelines for the recirculation,
please check the manual of your hood.
Mounting on the engine case
Install the PlasmaMade® Airfilter directly on the engine case through the channel
adapter. Use the screws 3.5x13 mm to clamp the channel adapter to the engine case
and the PlasmaMade® Airfilter. Connect the AC adapter with the PlasmaMade®
Airfilter (at the top) and the socket.
After activation of the extractor hood, the automatic operation of the filter is put in
motion.
12