Installation Instructions - Plasma Made GUC 1314 Installation And User Manual

8. Installation instructions

The PlasmaMade® Airfilter type GUC1314 can be mounted on almost any exisiting
and new extractor hoods. It must comply with the following conditions:
• The hood must be suitable for recirculation (the baseboard, cabinet or
soffit must be fitted with an opening through which the filtered air can be
vented back into the room). We do not recommend these openings to be
directed at the wall or ceiling. Provide a gap of at least 500 mm in
between.
• We recommend respecting a minimum distance from hob to bottom of
extractor unit (due to the heat production from the hob) of:
Induction/ceramic
Gas hob
Gas wok, 3.2 - > 6 kW
• A mains socket within a suitable distance (220 V, no earth needed).
Note: If the extractor unit is mounted at a smaller distance above the hob, the
PlasmaMade® Airfilter's guarantee is invalidated.
11
> 65 cm
> 70 cm
> 75 cm