Philips BDL4211V User Manual page 21

Energy Star Declaration
This monitor is equipped with a function for saving energy that supports the VESA Display Power
Management Signaling (DPMS) standard. This means that the monitor must be connected to a
computer, which supports VESA DPMS to fulfill the requirements in the NUTEK specification
803299/94. Time settings are adjusted from the system unit by software.
NUTEK
Normal operation
Power Saving
Alternative 2
One step
As an ENERGY STAR® Partner, PHILIPS has determined that this product meets
the ENERGY STAR® guidelines for energy efficiency.
NOTE: We recommend you switch off the monitor when it is not in use for quite a long
time.
Federal Communications Commission (FCC) Notice (U.S. Only)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
PHILIPS
BDL4211x
VESA State
ON
OFF
19
User Manual BDL4211x
LED Indicator
Blue
Amber
Power
Consumption
180 W (typical)
< 5 W