HP ipaq H2200 series Reference Manual page 65

DRAFT - Revised 10/16/02
Connecting
Using the Serial Infrared (IR) Connection
After setting up a connection with the USB/serial connector on
the synchronization cable or synchronization cradle, synchronize
your iPAQ h2200 and your computer using an infrared
connection if you have an infrared port or an infrared USB
adapter installed on your computer. The infrared connection
option works only on computers that have Microsoft Windows
98SE, Me, or 2000 operating systems installed.
To set up an infrared connection to a computer:
1. Synchronize with your computer using the synchronization
cable or cradle.
2. Follow your computer manufacturer's instructions to install
and set up an infrared port.
3. From your computer, open Microsoft ActiveSync.
4. From the File menu, select Connection Settings.
5. Click "Allow serial cable or infrared connection to this COM
port."
6. Click the OK button.
7. Click the down arrow and choose Infrared Port (IR).
✎
Place your iPAQ h2200 infrared port next to the computer
infrared port so they are unobstructed and within 12 inches of
each other.
8. From the Start menu on your iPAQ h2200, tap ActiveSync.
2–4
File: ch2-Connecting.fm PN: 293146-001
hp CONFIDENTIAL 11/27/02
Reference Guide