Bright Dot Defects - Philips 300WN5 Manual

Philips Pixel Defect Policy
One dark sub pixel
Proximity of Pixel Defects
Because pixel and sub pixels defects of the same type that are near to one another may be more
noticeable, Philips also specifies tolerances for the proximity of pixel defects.
Pixel Defect Tolerances
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT
LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the
tolerances listed in the following tables.

BRIGHT DOT DEFECTS

MODEL
1 lit sub pixel
2 adjacent lit sub pixels
3 adjacent lit sub pixels (one white pixel)
Distance between two bright dot defects*
Total bright dot defects of all types
Tiny bright dots less then 50% R/B, 30% G
* Bright Dot is defined as dots (sub-pixels) which appeared brightly in the screen when the LCM
displayed with whole pattern & Bright Dot's brightess is defined over 50% of the brightness against
around. (but, Green bright dot is over 30% of brightness against around)
file:///D|/My%20Documents/dfu/300WN5/english/300wn5/PRODUCT/PIXEL.HTM (3 of 4)2005-02-16 10:33:41 AM
Two or three adjacent dark sub pixels
ACCEPTABLE LEVEL
300WN5
N/A
Max 4
0
0
0
0