Sharp AQUOS Operation Manual page 74

>>
Using a PC
<<
Control of the TV (Continue)
CONTROL ITEM COMMAND
SURROUND A C S
AUDIO A C H
SELECTION
SLEEP TIMER O F T
PARAMETER CONTROL CONTENTS
U * _ _ _ 0: (Toggle),
1: On,
2: Off
A x _ _ _ (Toggle)
M * _ _ _ 0: Off,
1: OFF TIMER - 30 MIN.,
2: OFF TIMER - 60 MIN.,
3: OFF TIMER - 90 MIN.,
4: OFF TIMER - 120 MIN.
5: OFF TIMER - 150 MIN.
CONTROL ITEM
CHANNEL DIRECT D
CHANNEL
(ANALOG)
DIRECT D
CHANNEL
(DIGITAL)
D
D
NOTE
If an underbar (_) appears in the parameter column, enter a space.
If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL
CONTENTS.
Any numerical value can replace the "x" on the table.
ENG 7-6
COMMAND PARAMETER CONTROL CONTENTS
C C H * * * _ The
channel
number
of TV
(1-135)
A 2 P * * * * (0100-
9999)
C 2 U * * * _ (1-999)
C 2 L * * * _ (0-999)
An input change is
included if it is not TV
display.
In Air, 2-69ch is
effective.
In Cable, 1-135ch is
effective.
DIGITAL Air (Two-Part
numbers, 2-digit plus
2-digit)
DIGITAL Cable (Two-
Part numbers, 3-digit
plus 3-digit) Front half
of DIGITAL CABLE
CHANNEL NO.
(Designate major
channel)
DIGITAL Cable (Two-
Part numbers, 3-digit
plus 3-digit) Rear half
of DIGITAL CABLE
CHANNEL NO.
(Designate minor
channel)