Sharp AQUOS Operation Manual page 33

>>
On-Screen Display Menu
<<
Example
Initial Setup (Continue)
Input Settings
Color System
Select the video signal system compatible with your
equipment from the list below:
AUTO/NTSC/PAL-M/PAL-N
NOTE
"Color System" can only be set for the TV or VIDEO IN.
HDMI CEC Link
Make the settings to use LINK Operation.
Set the settings with "Initial Setup" > "Input Settings" > "HDMI
CEC Link Setup".
(See page 6-2.)
Fine Sync.
You can adjust the position on the image input from a PC the
settings with "Initial Setup" > "Input Settings" > "Fine Sync.".
(See page 7-1.)
ENG 4-12
Reset
If complex adjustments are made and the settings cannot be
restored to normal, you can reset the settings to the factory
preset values.
If you have already set the Secret No., input the 4-digit
secret number here.