Meccanica Benassi DAYTONA 2W User Manual page 31

} We recommend mowing in the parallel. Covering the previous coverage of the machine increases the
effectiveness of the blades and will improve the appearance of the mowed area.
} When travelling over uneven terrain the travelling speed may fluctuate.
5.5.4 TRAVELLING ON A SLOPE
Riding mowers models DAYTONA 2WD can work on
slopes with an incline of up to 18° (32%).
With the DAYTONA 4WD machine it is possible in the
longitudinal direction of the machine, i.e. in the direction
up and down, however not along the contour, to travel
over local uneven terrain up to a max. incline of 20°.
When working on a slope it is necessary to adhere to the
following fundamentals:
} Pay increased attention when travelling on a slope.
} Always use a lower travelling speed and regulate the travelling
speed by moving the travel direction lever.
} Only travel perpendicular to the contour, i.e. up and down.
Travelling in the direction of the contour is possible with extra
attention only when turning the machine. If at all possible,
avoid travelling along the contour.
} When turning ensure that a wheel does not drive over an
elevated obstacle (rock, tree root, etc.)
} Travel slower when trav elling down a slope or over obstacles.
Pay special attention when turning and turning around on
slopes.
} If you stop on a slope, always use the parking brake.
When overloading the machine by travelling on slopes over 18° (20°) there is a risk of serious
damage to the gear box. The manufacturer is not responsible for damage caused in this way.
31
Right
P
Max 18 o
DAYTONA 2WD
(32%)
Max 20 o
DAYTONA 4WD
(36%)
Wrong