Formatting An Sd Card - Roland TM-2 Owner's Manual

Trigger module

Hide thumbs

Table Of Contents

Table of Contents

Parameter

Explanation

This parameter prevents a single strike from triggering

two notes (retriggering). In particular since a drum trigger

produces an irregular waveform, the sound may also be

triggered at point 'A' in the illustration. This phenomenon

is more likely to occur while the waveform is decaying,

RetrgCancel

and unintended triggering is prevented by detecting the

irregularity of the waveform.

While you continue striking the pad, gradually raise this

value until retriggering no longer occurs. Excessively high

settings of this parameter will cause missed notes during

rolls.

Adjusts the rim sensitivity of the following pads.

Rim Gain

Higher value allows the rim to produce a loud volume even when played softly.

PD series, PDX series, CY series, RT-10S, PAD1, PAD2

This adjusts how easily head shots and rim shots can be played on the pads and drum

triggers listed below.

If the rim shot sound is triggered when you strike the head strongly, raise this value.

H/R Adjust

If the head sound is triggered when you strike a rim shot, lower this value. If the head

sound is triggered when you strike the rim softly, lower this value.

PD series (excluding PD-8), PDX series, RT-10S, PAD2

If multiple pads (or acoustic drums with drum trigger) are mounted on the same stand, the vibrations of your

strike may inadvertently cause another pad (or drum trigger) to produce sound (crosstalk); you can adjust this

XtlkCancel

parameter to prevent such crosstalk. For example if a pad B is inadvertently triggered when you strike a pad A,

raise the XtlkCancel value of the pad B until crosstalk stops. If this parameter is set to an excessively high value,

the pad B might fail to trigger if you strike the pad A and pad B simultaneously.