file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-EDFU/5B.0V401.001/CD-Contents/lcd/manual/ENGLISH/220C1/safety/saf_faq.htm 第 1 頁 / 共 8 [98-06-23 09:36]

FAQs (Frequently Asked Questions)

General FAQs

When I install my monitor what should I do if the screen shows 'Cannot display this video

mode'?

Recommended video mode for Philips 22": 1680x1050 @60Hz.

Unplug all cables, then connect your PC to the monitor that you used

previously.

In the Windows Start Menu, select Settings/Control Panel. In the Control Panel

Window, select the Display icon. Inside the Display Control Panel, select the

'Settings' tab. Under the setting tab, in box labeled 'desktop area', move the

slidebar to 1680x1050 pixels (22").

Open 'Advanced Properties' and set the Refresh Rate to 60Hz, then click OK.

Restart your computer and repeat step 2 and 3 to verify that your PC is set at

1680x1050@60Hz (22").

Shut down your computer, disconnect your old monitor and reconnect your

Philips LCD monitor.

Turn on your monitor and then turn on your PC.

What are the .inf and .icm files on the CD-ROM? How do I install the drivers (.inf and .

icm)?

These are the driver files for your monitor. Follow the instructions in your user

manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .

icm files) or a driver disk when you first install your monitor. Follow the instructions to

insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .

icm files) will be installed automatically.

How do I adjust the resolution?

Your video card/graphic driver and monitor together determine the available

resolutions. You can select the desired resolution under Windows® Control Panel

with the "Display properties"

Table of Contents

Troubleshooting

This manual is also suitable for:

220c1 220c1sb/05 220c1sb/00 220c1sb 220c1sw

Faqs (Frequently Asked Questions); General Faqs - Philips 220C1SW/00 User Manual