Drive Control; Self-Leveling Suspension - Ford EXPEDITION 2017 Owner's Manual

Table of Contents

Advertisement

DRIVE CONTROL

Driver Select Suspension
Driver select suspension delivers a unique
driving experience through a suite of
sophisticated electronic vehicle systems.
These systems continuously monitor your
driving inputs and the road conditions to
optimize ride comfort, steering and
handling.
Driver select suspension consists of the
following systems:
Continuously controlled damping
dynamically adjusts the shock
absorbers stiffness in real time to
match the road surface and driver
inputs. This system continuously
monitors your vehicle's motion (roll,
pitch, bounce), suspension position,
load, speed, road conditions, and
steering to adjust the suspension
damping for optimal vehicle control.
Electronically power-assisted steering
adjusts steering effort and feel based
on your vehicle speed and your inputs.
The configuration remains active until
modified from the main menu on the
information display. See General
Information (page 90).
Expedition (TB7) Canada/United States of America, enUSA, Edition date: 201604, Third Printing
Driving Aids
Modes:
Comfort – Provides a more relaxed
driving experience, maximizing comfort.
(If Equipped)
Your steering effort decreases and the
suspension movement is more fluid.
Comfort mode is ideal when you desire
enhanced traveling comfort.
Normal – Delivers a balanced
combination of comfortable, controlled
ride and confident handling. This mode
provides an engaging drive experience
and a direct connection to the road
without sacrificing any of the
composure demanded from your
vehicle.
Sport – Provides a sportier driving
experience. The suspension stiffens,
with an emphasis on handling and
control. The engine responds more
directly to your inputs. Sport mode is
ideal for use during more spirited
driving.

SELF-LEVELING SUSPENSION

The self-leveling suspension system is
designed to improve ride, handling and
general vehicle performance during:
Certain road conditions
Steering maneuvers
Braking
Acceleration
Towing
This system keeps the rear of your vehicle
at a constant level through a hydraulic
pump inside each rear shock. Depending
on the payload or road surface conditions
it will take approximately 2 mi (3.2 km) for
the leveling to complete.
193

Advertisement

Table of Contents
loading

Table of Contents