Care and maintenance
Cleaning the unit
Note: When the speaker is being used outdoors or when cleaning with water, please
insure the waterproof/dustproof port door is closed.
After a day at the sandy beach or the muddy trail, rinse your speaker off with warm water
from a sink faucet. Don't use soap, detergents, or any chemical cleaning products. Don't
use a garden hose, compressed air, or any other high-pressure stream to clean it, as this
may damage the speaker drivers. Don't use a brush of any kind, for the same reason
For a thorough cleaning, remove the fabric cover by pulling on the cover removal tab
(see page 2). With the fabric cover removed, be careful not to damage the speaker
drivers
It is recommended that any time the unit is exposed to salt water, chlorine or other
corrosive chemicals that the unit be rinsed with clean water. This will help minimize the
chance for corrosion on the unit.
User Manual
Fugoo GO Bluetooth Speaker
Model FSNA3
page 9
1/27/2017
Need help?
Do you have a question about the GO FSNA3 and is the answer not in the manual?