Setting And Function - MedeScan RC008 User Manual

SETTING AND FUNCTION

Button SCAN
When the thermometer is off,
press the SCAN button once
and the thermometer turns on
(LCD display lights up). Pressing
the SCAN button to measure
the desired temperature.
Button MODE
• Press the MODE button and
the display mode is displayed
Body - to measure the body
temperature
• Press the MODE button
again and the display
shows Surface Temp - for
measuring the temperature
of baby bottles or baths
• Press the MODE button for the third time and
the display shows Room - for room temperature
Note: The default setting on the thermometer
mode BODY
Button °C/°F
Press °C/°F change measurement from degrees
Celsius to
Fahrenheit
y and vice versa
37