Philips 200AW8 User Manual page 29

• Input signal levels
• Sync input signal
• Sync polarities
• Video interface
• SmartImage Lite
(Selective Models)
Audio (Selective Models)
• Loudspeaker
• Stand-alone audio
output
Optical characteristics
• Peak contrast angle
• White Chromaticity
* This data is subject to change without notice.
Resolution & Preset Modes
• Maximum
• Recommended
24 user definable modes
16 factory preset modes:
0.7 Vpp
Separate sync
Composite sync
Sync on green
Positive and negative
Dual input: D-Sub (analog) and DVI-D (digital) are available and
user selectable
Brightness, contrast, color, and sharpness enhancement
1W+1W Stereo Audio (1W/channel RMSx2, 20 Hz-20 kHz, 8 ohm )
Whether there is a video display or not as long as there is an
audio input, the audio output is always functional.
6 o'clock
x: 0.283 y: 0.297 (at 9300°K)
x: 0.313 y: 0.329 (at 6500°K)
x: 0.313 y: 0.329 (at sRGB)
RETURN TO TOP OF THE PAGE
1680 x 1050 at 60 Hz (analog input)
1680 x 1050 at 60 Hz (digital input)
1680 x 1050 at 60 Hz (digital input)