Kohler command pro CH742 Service Manual page 7

TORQUE SPECIFICATIONS
Crankcase
Breather Cover Fastener
Oil Drain Plug
Cylinder Head
Fastener (torque in 2 increments)
Nut
Bolt (torque in 2 increments)
Rocker Arm Screw
Flywheel
Fan Fastener
Flywheel Retaining Screw
Fuel Pump-Pulse
Fastener
Governor
Lever Nut
Ignition
Spark Plug
Module Fastener
Rectifi er-Regulator Fastener
Muffl er
Retaining Nut
Oil Cooler
Adapter Nipple
Oil Pump
Oil Pump Style A
Screw (torque in 2 increments)
Oil Pump Style B
Screw (no torque sequence)
3 Values are in Metric units. Values in parentheses are English equivalents.
Lubricate threads with engine oil prior to assembly.
5
24 690 34 Rev. D
3,5
KohlerEngines.com
CH682 CH732
11.3 N·m (100 in. lb.) into new holes
7.3 N·m (65 in. lb.) into used holes
13.6 N·m (10 ft. lb.)
fi rst to 16.9 N·m (150 in. lb.)
fi nally to 35.5 N·m (315 in. lb.)
fi rst to 22.6 N·m (200 in. lb.)
fi nally to 41.8 N·m (370 in. lb.)
18.1 N·m (160 in. lb.)
9.9 N·m (88 in. lb.)
66.4 N·m (49 ft. lb.)
2.3 N·m (20 in. lb.)
6.8 N·m (60 in. lb.)
27 N·m (20 ft. lb.)
4.0-6.2 N·m (35-55 in. lb.)
1.4 N·m (12.6 in. lb.)
24.4 N·m (216 in. lb.)
27 N·m (20 ft. lb.)
10.7 N·m (95 in. lb.) into new hole
6.7 N·m (60 in. lb.) into used holes
9.0 N·m (80 in. lb.)
Specifi cations
CH742 CH752
7