Advertisement
operating Instructions and Parts manual
Thank you very much for choosing a GreatLite
Product!
Save the receipt, warranty and these instructions. It is
important that you read the entire manual to become
familiar with this product before you begin using it. We
strongly recommend this flashlight is not modified
and/or used for any application other than that for
which it was designed. If you have any questions
relative to a particular application, DO NOT use the
flashlight until you have first contacted GreatLite to
determine if it can or should be performed on the
product.
ImPortANt INstrUCtIoNs
ANd sAFetY rULes
1. Know your flashlight. Read this manual carefully.
Learn the flashlight's applications and limitations,
as well as, potential hazards specific to it.
2. Keep work area clean and well lit. Cluttered or dark
work areas invite accidents.
3. Keep children away. All children should be kept
away from the work area. Never let a child handle
ProdUCt sPeCIFICAtIoNs
Output
Runtime
Beam
Distance
Impact
Resistance
Water‐proof
Grade
Accessories
PArt sPeCIFIC INstrUCtIoNs
- Uses Cree XM-L (T6) LED bulb, service life is 100,000 hours
- Uses (2) 3V CR123A Li batteries or (1) 18650 Li-ion battery
- Size: 160 mm (Length) x 27 mm (Diameter) x 50 mm (Head)
- Net weight 224.5 g (0.494 Lb.) (excluding battery)
- Constant current circuit, constant brightness
- Anti-reverse design prevents the damage to circuit caused by reverse loading of battery
- Non-slip design body
- Made out of aircraft aluminum
- Surface anti-wear treatment is done by using hard anodizing
- Uses anti-reflection temepered glass lens
Mode
50%
500
Lumens
250
Lumens
3
Hr
6
Hr
(1)
Li‐on
Charging
Unit,
(1)
18650
Battery,
Belt
Pouch,
Lanyard
seArCh ANd resCUe serIes
e81 reChArGeAbLe FLAshLIGht
a tool without strict adult supervision.
4. Use safety equipment. Eye protection should be
worn at all times when working this tool. Use ANSI
approved safety glasses. Everyday eyeglasses are
NOT safety glasses. Dust mask, non-skid safety
shoes, hard hat, or hearing protection should be
used in appropriate conditions.
5. Always disconnect the tool from the power source
before making any adjustments, storing, servicing,
or changing accessories. Such preventative safety
measures reduces the risk of starting the tool
accidentally.
6. Do not use the flashlight if the switch does not turn
it on and off. Any tool that cannot be controlled
with the switch is dangerous and must be repaired.
7. Check for damage. Check your flashlight and
batteries regularly. If part of the flashlight is
damaged it should be carefully inspected to make
sure that it can perform its intended function
correctly. If in doubt, the part should be repaired or
replaced.
8. Keep away from flammables. Do not attempt to
operate this flashlight near flammable materials
or combustibles. Failure to comply may cause
serious injury or death.
25%
125
Lumens
12
Hr
200
M/656
Ft.
1.5
M/4.9
Ft.
IPX‐8
2
eXPe81-e02
Flash
SOS
/
/
12
Hr
12
Hr
Advertisement
