INSTEON HD WI-FI CAMERA Owner's Manual page 14

Give your camera a user
name and password. When
ready, tap Next.
Disconnect the ethernet cable from
your camera and restart the camera by
disconnecting and then reconnecting
your camera's power cable. If you do
not disconnect the ethernet cable, your
camera will not switch to Wi-Fi.
Configure a Camera for Wi-Fi
iPhone, iPad and iPod touch
Tap Use Wi-Fi and select your network
from the list. If you don't see your
network, ensure that you've connected
the antenna to your camera.
If you are presented with information
about Remote Access, follow these steps
for Troubleshooting Remote
Enter your Wi-Fi network's
password and tap Next
Name your camera, select an
icon and add it to a room. When
Access. finished, tap Done.
You're done setting up your
Insteon Wi-Fi Camera.
14