Call Settings - Huawei P8 Lite User Manual

3
Select Call log and touch Back up.
4
Follow the onscreen instructions to configure a password.

Call settings

Configuring dialpad touch tones
1
Open Dialer.
2
Touch > Settings > Dialer touch tones and configure the touch tone settings.
The preset touch tone will be played when you touch the dialer. If your phone is in silent mode,
touch tones will be muted.
Enabling call forwarding
If you are unavailable to take a call, you can configure your phone to forward calls to another
number.
1
Open Dialer.
2
Touch > Settings.
3
Under SIM 1 or SIM 2, select Call forwarding.
4
Select a forwarding method. Enter the destination number and touch Enable.
When call forwarding is enabled, your phone will forward certain calls (such as unanswered
calls) to the number you specified.
Enabling call waiting
Call waiting allows you to take an incoming call when you are already in a call and switch
between the two conversations.
You may need to contact your carrier to enable this feature.
1
Open Dialer.
2
Touch > Settings.
3
Under SIM 1 or SIM 2, select Additional settings and switch on Call waiting.
When you receive an incoming call while already in a call, touch
to switch between the two calls.
Enabling pocket mode
Enable pocket mode to make sure you don't miss calls when your phone is in your pocket. The
ringtone volume will gradually increase when you receive a call.
1
Open Dialer.
2
Touch > Settings.
Calls and Contacts
to answer the new call, and
76