Bottom View; Removing A Battery - Dell Precision M60 Series Information Manual

Bottom View

hard drive
Mini PCI
card/modem cover

Removing a Battery

For more information about removing the second battery, see "Using the Module Bay" in
your online User's Guide.
CAUTION: Before performing these procedures, read and follow the safety
instructions that begin on page 5, turn off the computer, disconnect it from the
electrical outlet, and disconnect the modem from the telephone wall jack.
NOTICE: If you choose to replace the battery with the computer in standby mode, you have up
to 90 seconds to complete the battery replacement before the computer shuts down and loses any
unsaved data.
Ensure that the computer is turned off, suspended in a power management mode, or
1
connected to an electrical outlet.
If the computer is connected to a docking device (docked), undock it.
2
See the documentation that came with your docking device for instructions.
20
System Infor mation Guide
battery-bay latch release
fan
battery
docking device slot
memory module cover
battery charge gauge